What is an Automatic Gate?

Automatic gates, long used as a means of controlling access to secured areas in commercial and industrial settings, have recently become increasingly popular for residential use as well. Having an automatic gate protecting access to your home's driveway, fitted in as an integral part of your property's fencing or other form of protective barrier, provides multiple benefits, including increased safety and security. With the convenience of automation, these gates may be opened and closed in a variety of ways and, when going through while in your automobile, may be opened without the need to leave the confines of your vehicle. This increases the safety factor and also allows you to stay warm and dry during inclement weather. 

 Types of Automatic Gates 

Automatic gates come in a wide range of sizes, weights and configurations. They may be as simple as a sliding panel composed of chain-link fence or of ornate construction with fancy wrought-iron scroll work designed to match the adjacent fencing. The most popular type of automatic gate for use in residential or light-commercial applications is probably the slide gate. This consists of a panel that operates by sliding back and forth across the opening while riding on supporting wheels or rollers. Also known as "rolling" gates, the rollers travel along a track that has been installed on the ground. Because these tracks can easily be blocked by debris, snow and ice, however, they can present some ongoing maintenance concerns. 

Other popular automatic gate types include:  

Cantilever Gate – similar to the slide gate except the track is replaced by a raised rail that allows the gate to travel up off the ground.

Swing Gate – hinged on one side to open and close like a door, these gates are popular because of their relatively low cost and easy installation. They may be a single- or double-leaf configuration and can be made to swing either in or out, assuming there's enough room available to accommodate the 90-degree swing in a particular direction.

Vertical Lift Gate – this gate moves vertically up and down over the opening, traveling along vertical supports tall enough to allow for vehicles to drive underneath the gate when fully opened. These are useful in an application where a swing gate can't be used because of limited space. These lift gates have a somewhat industrial look and may not be the best choice for residential use where appearance is a primary concern. 

Other types of automatic lift gates include Pivot Gates, Bi-Fold Gates and Barrier Arm Gates, which are popular for use at entryways and exits to vehicle parking areas. 

 Operators and Means of Access 

Automatic gates feature two basic components: the gate itself, which is what moves in order to block the opening, and the operator, which is what powers the gate's movement. Operators typically use standard electrical power but may use solar power. Mechanical movement may be chain driven, hydraulic or gear driven. Devices used to initiate a gate's opening include:  

- Car readers 

- Vehicle tag (RF) readers 

- Digital keypads 

- Wireless hand-held remotes (similar to garage-door openers)  

An automatic gate operator may be used in conjunction with an intercom system that allows visitors a means for contacting someone inside who can activate the gate. Surveillance cameras may also be used to view and/or record activity around a gate and to visually confirm a visitor's identity. Exit loops or sensors may also be used to automatically operate a gate when a vehicle is leaving the premises. Safety concerns should always be addressed when installing automatic gates to ensure pedestrians and vehicles are protected from damage or injury. 

How to Best Seal a Garage Door

With the weather getting chillier it may have become clear that your garage doors have air gaps around the sides that needs to be fixed. It's important to know that the garage is a space that needs proper sealing, especially if it is attached to your house. Having a seal around your garage door will have many positive benefits. 

Creating a seal for your garage doors is fairly simple. There are a few tips and tricks to make the best possible seal around the doors. You have to choose the type of seal you want for your garage door. This is purely based on your preferences. There are also many colors to choose from making it easy to match your garage and house. 

Inspecting and preparing your garage doors 

First inspect your garage doors, gaps will allow light in. If you have gaps you will need to seal or reseal the doors. To prepare for sealing be sure to adjust the door opener or the top joints in order to get an even gap. A key point to remember while installing the sides and top is not hammering nails in while the stop boards are bent, if you are using a seal that has a PVC molding. This will result in breaks and fractures in the boards. 

Sealing the top of your garage doors 

The top of your garage door should be sealed first. When sealing the top of your garage door the process will be similar to that of the sides. However, one step that will be important is to cut the corners of your vertical stops. This will allow the sides to meet the top without any gaps. 

Sealing the sides of your garage doors 

In order to have a good seal you must address all sides of the garage door. Weather stripping for the garage door is ideal for the sides. The outdoor elements such as wind and rain can easily leak through without proper materials. The weather stripping is simple to install. You need only use some nails to attach the material to the garage frame. 

With both your top and bottom garage door seals you must make sure the seal creates a 45 degree angle against your garage door before completely nailing them into place. You may have to adjust some sections slightly. Try to keep your nail spacing for the top and sides at about 6 inches apart. 

Sealing the bottom of your garage doors 

You can address the sealing at the bottom of your garage door in two ways. One, you can use a bottom seal. This is a flexible rubber or vinyl that attaches to the bottom edge of the garage door. It will keep out the water from rain, cold chills from the wind, pesky vermin, and even dirt. The bottom seal is easily slipped with no extra fuss. 

The second option is to install a threshold seal. The plus side to this option is that it can be more durable than a bottom seal. However, it does make sweeping a bit more challenging, and it is harder for water to flow out. It is also easy to install and usually comes with the adhesive needed. 

With a proper seal on your garage doors you will find it warmer on cold nights, you won't have to worry about critters entering your space, and with a proper seal you will find a reduction in noise. Not only does this benefit your home, it also benefits you. Not only that, the savings you will see on your energy bill is an added bonus. 

How Good Are Insulated Garage Doors?

With energy costs these days, garage door insulation is just as important as anywhere else in your home. More and more people are using their garages as a work space or as a spot for social gatherings, its not just about storage anymore. 

You may be wondering what the difference is between the standard garage door and an insulated one. Also, whether or not the insulated garage door would be that much of a change if you have a regular uninsulated garage door. There are many good reasons why an insulated door is a good investment. 

Insulated doors are great if your garage is more than a garage.

When you use your garage as a hangout or as a workshop you want the space to be comfortable. When temperatures outside change so does the temperature inside your garage. With an insulated door the temperature will stay within a more even range. 

An insulated garage door will help keep your space warmer in the winter months. Likewise, it will keep the garage cooler in the summertime. This can be extremely important if your garage is connected to your home. 

Insulated doors keep air from entering into your home.

When your garage is attached to your home it is important the garage be well insulated. This is because the air in the garage can travel in through the doorway. This can mean a cold breeze making your heater run more often, or it could bring in unwanted heat. Both can mean an increase in the energy bills. An insulated garage door will help to eliminate the movement of air from outside to the inside. 

Insulated doors keep upper rooms comfortable.

The air in your garage can travel up through the ceiling and into the floor of rooms above. This can also cause a fluctuation of temperature in these rooms. With an insulated garage door keeping temperatures in the space fairly stable, the rooms above will not be affected. 

Insulated garage doors keep noise down.

With an insulated garage door you will find that life is a little quieter. It will cut down on the noise from outside. It also cuts down on the noise coming out of your space. This is ideal if you tend to work late with tools. The neighbors will not be bothered by late-night hammering. 

Insulated garage doors are better looking and cleaner.

An insulated garage door has a more attractive interior than a garage door that is not insulated. While this is not as important of a feature as keeping things warm, it is a nice bonus. Especially if you use this space to entertain and hangout with others. If you do entertain in the garage the insulated doors will be easier to clean, if you want them cleaned. 

These are all perfect reasons to have your garage door switched out for a new insulated one. If you do have a garage door that is insulated but find that it is not keeping the space comfortable, you may need to replace it with a better quality, more energy efficient insulated garage door. 

Creating an Effective Safety Meeting Agenda

Creating a comprehensive safety meeting agenda for your business is essential to protecting employees and maintaining a comfortable working environment for all. Organizing safety meetings on a consistent basis can be a much easier task with a safety meeting agenda to follow. If you would like to ensure your safety meetings are a success, be sure to touch up on these 4 important topics.

1. Overview of Past and Present Safety Concerns

It is often a good idea to start off any safety meeting with previous safety concerns and how they have been addressed since the last meeting. This is a good opportunity to talk about various areas that could use improvement or reiterate the importance of following obligatory safety protocols in the workplace. Likewise, if you have noticed an individual in your business has taken safety precautions to heart, take the time to recognize him or her for the commitment. A little safety can go quite a  long way at any business.

2. Evaluate Results of Recent Safety Inspections

If your place of work has recently undergone a safety inspection, sharing the outcome with employees and other members of management is a good way to shed more light on safety issues. If the safety inspector saw few problems to address, be sure to let those under your employment know they are doing a great job. In the case that a safety inspection falls a little short, it is essential to explain what the problem is and how it should be resolved in the future. While members of management will ensure employees are staying on task and remaining safe, managers cannot be everywhere at once. For this reason it is crucial that every member of your team is on board with always raising the bar when it comes to workplace safety.

3. Facilitate Safety Education and Training

Every workplace should encourage safety training for both employees and members of upper management. It may even be a good idea to hire an outside safety consultant to give classes on workplace safety practices and how to avoid accidents or injuries. Also, by providing everyone in your business with the opportunity to learn about safety in the workplaces, worker's compensation claims will likely plummet due to increased safety awareness. When a business neglects to provide this vital training to employees or managers it is entirely possible for an individual to hold the business liable in the case that an accident occurs. By offering your workforce access to safety education courses, a myriad of potential problems can be alleviated altogether. Proper safety training is potentially one of the most important components of a successful safety meeting agenda.

4. Engage in Open Discussion

Finally, put some time aside to have an open discussion among the staff regarding safety in the workplace. Giving employees and members of management a chance to voice their safety concerns or congratulate others for their hard work will encourage more intercommunication among staff members, translating to less misunderstandings or workplace injuries. Be sure to also give everyone a chance to speak before calling the meeting to a close.

Once the safety meeting has been successfully completed, determine a time and place for the next meeting that best accommodates your business itinerary as well as the schedules of employees. Over time you may begin to notice a drastic reduction in injuries or accidents and a much more productive atmosphere at work. With an organized safety meeting agenda you can enjoy a much more comfortable work environment and those who are under your employment will certainly appreciate your dedication to their well being.

Your Warehouse Needs a Loading Dock Safety Checklist

A warehouse loading dock can be as busy as a beehive as it's the hub of traffic with products going in and out. With loading and unloading of large trucks, forklift trucks running, and many other operations taking place it can often be hazardous for people working here. That is why there are special OSHA rules that govern the safety of warehouse loading docks and it pays to have a warehouse loading dock safety checklist that you can refer to and take necessary action.

OSHA Safety Rules for Warehouse Loading Docks

Most OSHA regulations for warehouse loading docks are related to operation as well as design of forklifts and maintenance of gates and doors.

Forklift operators have to be duly trained to operate forklifts and these machines also should be properly maintained for safe operation. Furthermore, warehouse loading docks also are prone to slips, falls and trips. That is why the walking and working surfaces should be slip-resistance.

Ill-maintained gates and doors are known to cause several injuries, some fatal, at warehouse loading docks. Hence, warehouse managers and supervisors should ensure these are duly serviced and maintained to minimize chances of accidents and injuries.

Making Warehouse Loading Dock Safe

Maintaining warehouse loading dock safety can often be challenging and an ongoing endeavor. Hence, having a checklist at hand will make it easy for warehouse supervisors and managers to ensure complete safety.

Here is one warehouse loading dock safety checklist that you can look at and expand.

• Train all personnel at the loading dock about safety and ensure those rules are enforced.
• Industrial truck drivers and forklift operators are trained to give right of way to pedestrians.
• Color-coded paint to mark different areas of the warehouse loading dock, such as doorways, walkway barriers, overhead obstacles and parking aisles.
• Install padding or guards around sharp corners to protect people walking through the facility.
• Inspect palletized materials regularly to weed out defective pallets and place products into safe pallets.
• Secure pallets with plastic or metal banding during storage and transportation
• Every stationary vehicle is retrained with wheel chocks
• Clean out the loading dock regularly to prevent a pile up of debris and dirt
• Ensure emergency exits are not blocked and doors are functioning properly.
• Make sure roll up doors at the loading dock are properly maintained. If there is a problem, it should be rectified immediately by a trained and qualified specialist to prevent accidents.
• Are warehouse ergonomics in place? Adjust height of conveyor belts to minimize lower back pain. Heavy products should be placed at knee or chest level only. Have a limit to the amount of weight each worker can carry and encourage assisted lifting in the facility.
• Paint the edge of the loading dock area with reflective white to ensure workers have a clear view of the dock.
• Wrap all loose products meant for storage or transportation in shrink-wrap to prevent them from falling on personnel.
• Powered doors at the loading dock should be periodically checked and maintained as per manufacturer’s instructions.
• Mark overhead hazards, such as electric wires, doors and pipes, so that they can clearly be identified.

Use this warehouse loading dock safety checklist to keep your facility safe for your worker. You can add to it if necessary.

Keep Your Staff and Customers Safe with Fire Doors

For many business owners, safety for both staff and customers is a top priority. By having the right type of fire doors in your place of business, you can be confident that you are doing your part to protect everyone in the event of a fire.

How They Work 

Fire doors are specifically designed to be resistant to high heat and are not very flammable. They can hold up in extreme situations and provide a protective barrier while the people inside evacuate. Some doors prevent smoke from reaching through, and this gives people even more time to escape. The doors are designed to last for a specific amount of time, making it possible for you to create a feasible evacuation time.

Fire doors are layered with certain fire-resistant materials, and vary in construction depending on the needs and requirements of their application. Possible materials include the following:

• Glass

• Gypsum

• Steel

• Timber

• Aluminum

• Particleboard

The door includes strips known as intumescent strips that expand in heat and seals the gap between the edge of the door and the frame. Many doors are equipped with an electromagnet that keeps he door closed if the fire alarm is triggered. Others are designed to be kept closed at all times. 

Benefits of Fire Doors

Aside from the obvious benefit of providing a safe escape for your employees and customers, a fire door also protects the content of your business. It does this by reducing the spread of the fire. In addition, it makes it easier for fire fighters to extinguish the fire. This further reduces the damage to your business and the building's contents. 

The piece of mind that comes with efficient fire doors is invaluable. You and your employees will feel much safer knowing that there is a good plan, and morale is boosted in their knowledge that their safety is your concern. Depending on your insurance, you may also experience a savings if the proper doors are installed.

Types of Fire Doors

As mentioned above, you may have a fire door that you can open and close on a daily basis or one that is designed to remain shut. You can also have a fire roller screen, which can cover a door but is not designed for daily use.  For larger openings, a roller shutter can protect your business inside or outside.

Different models have different options; you can customize the color, have special detectors installed, and have various controls available. The doors can be designed to resist flames from anywhere between 20 minutes to four hours. No matter what type of business you own or what type of escape plan you have, you can find the right fire door to keep your business and your patrons safe and out of harms way.

The Three Garage Door Components Most Likely to Fail



Automated garage doors have made life much easier for many people and also offer a greater degree of safety and security for your vehicles and your home as well. However, moving parts can and will succumb to wear, tear and failure. However, there are three components that are the most likely to cause problems with your garage door.

Springs

Springs are widely used in garage door systems to help keeps things on track and moving the way they should. They are often held under a great deal of pressure and tension which can cause them to wear out quickly. Springs, especially torsion springs, are the most expensive and are also the ones most likely to give out and break. Many manufacturers try to save money and cut costs of producing springs and they use un-coated springs. These springs are rated for approximately 10,000 cycles, which means it will last for 10,000 open/close cycles before it gives out to the point where it will no longer function. This type of spring usually will last between 3-5 years.

Higher grade systems will usually use powder-coated and high grade commercial quality springs. The coating helps them stay in shape longer, helps them resist rust, and they usually are rated for 30,000 cycles or higher, which translate into a longer life cycle. Always be sure you look into the cycle ratings each time you replace the spring to ensure you are using one that will last.

Rollers

Rollers are very important to the functioning of the garage door. Manual garages need them but especially automatic garage doors will rely on rollers for smooth operation. The rollers are what helps guide the door up and down the track. Most garage doors are designed to use plastic or nylon tires that are secured on a steel shaft that will travel along the track for the door. While these rollers are affordable and easy to find and replace they do not last as long and will wear out faster.

Cheap rollers usually have a life span of about 12-18 months with average use. Rollers with metal components and bearings are typically better. They are more expensive and harder to find but they last much longer and actually save you money on frequent replacements. Ask about the rollers that your technician recommends when you need service work done on your garage door system.

Bearings

Bearings are the third piece of garage door components that you will likely end up replacing quite a bit. A typical automatic garage door system will have several designs but they all should have three sets of bearings- the middle and both ends of the door. The more bearings there are the more distribution there is in the work load they have to carry- so the more the better.

Some designs have only two bearings at the ends of the door, which makes them wear out faster and makes it easier for them to wear out and come out of alignment. When getting a garage door system in place, it is best to get one that uses three bearing sets rather than two.

Call R&S Erection of Concord today to schedule maintenance for a garage door that works better, lasts longer, and keep you and your family safe.