Replacing a Garage Door Seal

Your garage door seal plays an important part in keeping moisture and cold air out of your garage. It also helps to keep small critters and insects from crawling into your garage through small cracks or spaces under and around the door. If you need to replace an old or damaged seal, here are some DIY tips to help you through the process.

Measure Your Door.  First, you'll need to measure the width, height and depth of your door to buy the right seal. You'll need to buy V-strip weather stripping and a tube of exterior caulk. If you have a wooden door, buy a can of wood sealer as well. For maximum energy efficiency, a rubber seal typically works best, but in locations that get a lot of ice and snow, a “cold weather” silicone seal will resists cracking and remain flexible in extreme temperatures. If your door has a metal track that holds a replaceable seal, you can replace the old seal by sliding the new seal into the track. For easier application, you can lubricate the new seal with household dish washing liquid before sliding it into the track slots.

Old To New.  Raise the garage door to a comfortable working height so you can reach the old seal, then begin to slide the old seal out of the track. If it's difficult to remove in one piece, cut it into pieces for easier removal. If the ends of the track are damaged or crimped, open them up with a flat screwdriver to get the old seal out. Cut the new seal to the right length, thread the T-shaped edges into the metal track, then begin to slide the new seal into the track across the garage door. If you have a wooden door, you may need to remove a nailed rubber seal first, then use the wood sealer to seal the wood. For maximum energy efficiency, clean the areas between the door sections and install pressure-sensitive V-strip weather stripping in each section.

If your garage door has a threshold attached to the concrete where your door opens, you may want to replace it as well if it's old or damaged. Remove the old threshold and clean the concrete with a degreaser and warm water, then rinse and let dry. Cut the threshold to the right width, then roll the threshold into place with the hump on the inside of the door. Next, glue the threshold into place along the concrete and gently close the door firmly against it. Leave the door closed until the adhesive dries completely.

Depending on the type of garage door you have, there may be side and top seals that need to be replaced as well. Since there are numerous types of these other components, it's best to check the manufacturer's replacement requirements or contact a garage door company for the correct replacement parts. Although replacing the bottom seal for your door is relatively simple, it can take time and some pushing and pulling to get the seal into the track. If you're not up for a DIY project, call a professional garage door company who can help you replace your old seal properly.

How to Repair a Fiberglass Garage Door

A fiberglass garage door is a great way to reap the benefits of a steel garage door without worrying as much about maintenance costs. This is because fiberglass garage doors are essentially steel garage doors with a durable fiberglass coating. 

Benefits of Fiberglass Garage Doors 

Many homeowners are attracted to fiberglass garage doors because of their greater reliability and vintage look. As added bonuses, fiberglass doors help to insulate your home more efficiently, improve your home's outdoor decor and feature many of the same benefit checklist as steel garage doors. 

Things to watch out for with fiberglass garage doors, though, are small scratches or nicks that can expand over time. That said, you shouldn't be needlessly worried about touching up your fiberglass door - repairs can be done with over-the-counter bonding solutions, basic tools and an ounce of know-how. 

Steps to Repairing Your Fiberglass Door 

Locating the Crack 

The first diagnostic step you'll want to take is actually finding the crack. If the crack isn't clearly visible, then try taking your best guess as to the crack's location and listening. You'll be listening for a dull thud, which is indicative of a piece of fiberglass in need of repair.

Excising Damaged Areas 

Next you'll want to cut out the damaged region of your fiberglass garage door. Using a utility knife or grinder to take out the damaged area (and any enveloping bonding) will make applying the epoxy resin that much easier later on.

After removing the damaged area, now it's time to measure the effected area to accommodate a replacement piece of fiberglass panel.

You might want to install a waxed backer to make the actual installation more seamless. Waxed backers work great because they give you a more solid foundation to do your handiwork from while giving you a clean finish once you're done. 

Applying Replacement Piece 

Now you're ready to apply the replacement piece of fiberglass to the area in need of repair.

With your replacement piece in hand, fit the new piece of fiberglass into the area that you've cut out and press firmly to make sure that your bonding stably holds the replacement piece.

Making the Results Stick

If possible, try pressing the new piece against your wax backer for five to ten minutes to ensure proper bonding.

You can use a bonding agent like Liquid Nails to keep your replacement piece in place. Just make sure to let whichever bonding agent you go with dry overnight. 

It might also be a good idea to apply a body filler after your primary bond dries overnight in order to give a more seamless overall look to your new-and-improved fiberglass door.

Sandpaper can be used to smooth over your handiwork and paint can go a long way to removing traces of repair. 

Choosing the Right Loading Dock Bumpers

The right loading dock bumper is essential to ensuring that your business and its fleet remain efficient and safe. It's not always intuitive, though, which loading dock bumper is the most appropriate for your business needs, inventory and on-site vehicles.

That's why we've compiled a list of different types of loading dock bumpers - from laminated and extruded dock bumpers to steel-faced bumpers and molded docks - to help you make a more informed decision.

Your business and fleet are worth it, and after going through this list you'll have a better idea of which bumpers offer the most in terms of durability, affordability and protection for your business' most valuable assets. 

Laminated 

If you're a business owner who cares about the durability of your products - and who isn't? - then laminated dock bumpers are a terrific option for your loading area. Why? Laminated bumpers require almost no upkeep and can withstand even severe weather without corroding or needing to be replaced. 

Laminated dock bumpers can help protect your fleet's vehicles and the building on which the bumper itself is mounted to. Ideal for businesses that have medium or even heavier traffic throughout the day, laminated dock bumpers can withstand the test of time and provide years of dependable convenience.

As an added bonus, many laminated dock bumpers work great with lock seals and help keep in cool, refrigerated air. This feature comes in handy for fleets going to and from grocery stores or other vehicles in the service and hospitality industries. 

Extruded  

Extruded dock bumpers are all about versatility and can be used across industrial applications as well as providing protection for forklifts, parking garages and even boats.

In fact, extruded dock bumpers work well both outdoors and indoors. Extruded dock bumpers look great and are made from a resilient rubber material; these kinds of bumpers also come in your choice of style and a wide selection of sizes. 

That said, extruded dock bumpers are somewhat less well-suited for heavy truck traffic than laminated bumpers. An ideal application for extruded dock bumpers would be a parking garage, marina or indoor loading area that gets light to medium traffic from forklifts.

The fact that extruded dock bumpers are non-intrusive, extremely easy to install and considerably more lightweight than other kinds of bumpers works in the favor of building managers and small business owners around the country. 

Steel-Faced 

As you might already have gathered from the name, steel-faced bumpers can take a beating and work great to combat the abrasion that comes from trucks slamming against the bumper's surface. 

Steel-faced bumpers are perfect for protecting your building from high traffic in busy outdoor loading areas. This option, again, works well for high traffic since the steel-faced dock bumper's surface is usually reinforced with a half inch of extremely tough steel. 

What does this mean for you? Steel-faced bumpers will stand the test of time and protect your fleet for years to come. Moreover, steel-faced bumpers have less of a wear expectancy and longer lifespan than many other bumpers that combat daily high traffic loading areas. 

Molded 

Molded dock bumpers work well in loading areas that receive relatively light traffic. These kinds of bumpers take their namesake from the fact that molded bumpers are molded together from composite parts. The final product is incredibly discrete and efficient for your business. 

In spite of the discrete size, molded dock bumpers are durable and won't rust or contort over time. Since molded dock bumpers can withstand inclement weather as well, they'll lend a helping hand for years to come. 

10 Ways to Make Your Garage More Energy Efficient

If you have an attached garage, it's important to make sure it's energy-efficient. Most people think of their garage as an outdoor structure, even when it's attached to the house. However, unless it's an energy-efficient space, it could be draining out a lot of warm air in the winter and cool air in the summer from your home. Take a look at 10 ways you can make your garage more energy-efficient and cut down your yearly energy costs.

1. Insulate the Garage Walls

In most homes, both old and new construction, the garage walls are not insulated. Typically, there's only exterior wood or siding, radiant sheathing, and a layer of particle board between the elements and the garage. By adding a layer of proper R-value insulation between the joists, or using blown-in insulation through the drywall, you can create a more energy-efficient garage.

2. Caulk Between the Garage Wall and Floor

Over time, the joint between the garage walls and concrete floor usually swells or shrinks as your house settles, creating air flow from outside. By applying a simple bead of latex, silicone or foam sealant between the garage walls and concrete floor, you can prevent loss of warm and cool air.

3. Seal Floor Cracks

Most garage floors are poured concrete which doesn't provide much insulation. However, if the concrete floor has developed cracks from settling or the weight of your cars, outside air can pass through these cracks. Sealing the cracks with a good concrete sealant will prevent air flow.

4. Insulate Your Garage Door

If your garage door isn't properly insulated, it's easy for cold or hot outside air to enter your garage., especially if the door is made of thin aluminum. There are two ways to fix this: buy an insulation kit for your existing door, or buy a new energy-efficient garage door to protect your garage.

5. Seal the Door from the Garage to the House

If you have a door that leads into your house from your garage, air leaks can develop around the door and threshold. To prevent this, install weather-stripping around the door frame, and a new threshold or a draft stopper. Caulk the trim around the inside and outside of the door to create a proper seal.

6. Change Your Garage Lighting

If you're using conventional incandescent light bulbs in your garage, change them to either CFL or LED lights for better energy-efficiency. A LED light bulb uses 12 watts of electricity and a CFL bulb uses 15 watts to create the same amount of light output (lumens) as a conventional 60 watt bulb.

7. Insulate Light Switches and Electrical Outlets

Insulate light switches and outlets with foam gaskets. Even the smallest cracks can allow cold and hot air into your house. They can also allow dangerous carbon monoxide fumes that build up from your car's exhaust system to enter your home.

8. Install Energy-Efficient Windows

If you have old windows in your garage, switch them out for new energy-efficient windows that will prevent air leaks and save money on yearly energy costs. Older-style windows can cost you hundreds of dollars more each year in your heating and cooling bills.

9. Install Solar Heating

If you spend time or have a workshop in your garage, installing solar panels for heating and cooling will make your garage and workspace more comfortable and energy-efficient year-round.

10. Organize Your Garage

A cluttered garage can prevent proper air flow and creating uneven temperatures. By simply organizing your garage space, you can generate more energy-efficiency. If you need more storage space, consider an outdoor shed.

How to Align the Lasers on Your Garage

Aligning the photo eye sensors on your garage door is absolutely essential to reaping the most benefit from your investment. Let's get into how your garage door sensors work, how they can go wrong and what can be done about it. 

How Photo Eye Sensors Work 

The two photo eye sensors of your garage door actually ping-pong a continuous signal back and forth to determine whether there's an obstruction blocking the door from opening and closing. To the frustration of many homeowners, a broken signal obviously disables your door from remotely opening and closing properly. 

The signal from one garage photo eye sensor to another is said to be aligned with the signal goes through unimpeded ("correct") and "broken" when the signal is either obstructed by an object or your sensors aren't aligned with one another.

Although all of this can be irritating to deal with and troubleshoot, the purpose of your garage's photo eye sensors is really to ensure your family's safety and convenience. Luckily, though, you can take steps to ensure that your garage's laser sensors remain aligned and functioning properly. 

Diagnostic Signs to Look For 

We'll get into the strict how-to troubleshooting of fixing the problem in a moment, but here's what you need to know when it comes to initial diagnostics. 

Remember that the photo eye sensors can be either "correct" or "broken." Bearing this in mind, when your garage's sensors are "correct" this means that the LEDs wiring and alignment are in tune with each other. A green LED light on the receiving sensor indicates that your garage door sensor is working as it should. 

If you're reading this article then there's a good chance that you're not seeing all green, so to speak. Granted there's no physical impediment (bike, etc.) blocking the sensors from communicating with each other, a sporadic or dim green LED signal from your garage door sensors indicates that alignment is probably needed. 

Also note that some homeowners, understandably, misinterpret the amber LED light on one of their garage sensors for a problem or misalignment indicator.

Although you could have a misalignment, the amber LED on your sending garage door indicator simply indicates that the sensor is functioning; in other words, this amber LED shines no matter whether the sensors are chatting, broken or there's some obstruction blocking the communication. 

Getting in Tune: Aligning Your Garage's Sensors 

On most systems the sending LED shines a constant green when it's working properly and flickers when you wave your hand in front of it or an object is obstructing communication. 

If you know you have a problem, then simply pop the solid green (receiving) LED from the bracket. You can do this by unscrewing the wing nut. 

From there, shine the sending sensor's LED in a different direction from the receiving one so that the LED light on the sending sensor turns totally off. Wait thirty seconds or more. Finally, turn the sensor until you see the light returning and replace the sending LED sensor in the bracket and tighten the wing nut. 

You can now test your photo eye sensors' alignment and the garage door's functionality by pushing the control button located along the wall.

If you're still having problems, check to make sure that your photo eye bracket hasn't been warped or bent in any way.  For more sophisticated troubleshooting tips, contact your garage door manufacturer directly. 

Fun Ways to Spruce Up Your Garage

Many of us use our garage as storage space. It is where we keep our gardening and lawn care tools and where we stick the odds and ends that we have no place else to store. As the place where random items are stashed, it can easily become cluttered over time. Whether you want to clean out your garage for spring, because you plan on showing it to potential buyers or just because you are tired of the clutter, here are some fun ways to freshen up the space and to make it a more enjoyable part of your home:

• Organize Its Contents

Not only will this make your garage look better, it will make items easier to find as well. Consider grouping the items by type, so that there is one area for your sports equipment and another for your gardening tools and so on. Also, consider installing shelves and cabinets for better organization.

• Set Up Separate Workspaces

Do you share the garage with your spouse or another family member? Separate workspaces may be the way to go to keep the garage uncluttered and to preserve your relationship. Consider demarcating separate areas so that there is no conflict over what is yours and what is theirs. There are even shelves and cabinets that can be used to create walls for this purpose.

• Get A New Garage Door

Your garage door is one of the most visible components of your home's façade. If you are planning to sell your home, getting one that is secure and aesthetically pleasing is a must. Its visibility means that it greatly affects curb appeal and will influence the potential buyer's first impression. The right garage door will not only make your home look better, it will make it more secure as well. Your options include garage doors that are insulated for greater energy savings and ones that are safer to operate.

• Invest In Garage Technology

Modern technology offers you a lot of options for sprucing up your garage. The technology includes smartphone apps that can control your garage door opener. These apps allow you to close and open your garage door from anywhere that you can find a usable cell or Wi-Fi signal. This means that you can operate your garage door opener from around the world. Motion detector lights are another useful form of garage technology. Having these installed keeps you from having to remember to hit the light switch on the way out.

Garages are magnets for clutter, but it doesn't have to be this way. It is possible to resolve the chaos by following these few simple steps.